Impala Platinum Refineries (Implats) Engineering learnerships — Fitting and Boilermaking; 2027 planning guide

Implats Engineering Learnership Programme 2027: Fitting & Boilermaking

Two trade streams in Springs: Fitting (iplat_000174) and Boilermaking (iplat_000173). Completed relevant N2 or NCV Level 4 certificate required; compare the different N2 subject lists. Both close 30 November 2026. Basic trade knowledge, medical fitness and local host-community preference are stated. The adverts do not name a 2027 intake or specify start date, duration, stipend or number of places. New-applicant signup requires a CV up to 10 MB; see the article for verified requirements and preparation guidance.

RECRUITMENT STATUSApplications advertised as open — verify with employer
Advertised closing dateNovember 30, 2026
OrganisationImpala Platinum Refineries (Implats)
TypeEngineering learnerships — Fitting and Boilermaking; 2027 planning guide
LocationSprings, Gauteng, South Africa
DurationNot specified in the current adverts; confirm with Implats.
Interactive opportunity guide

Explore this opportunity, your way

Choose a topic, explore the details and mark what you have read. All application information is available without completing activities.

YOUR QUICK GUIDE22 quick sections

Choose a section for the details. Your reviewed sections can be remembered on this device.

0 / 22 reviewed
Tap a section to see details
01SECTION 1 · 1 MIN READQuick overview: Implats engineering learnershipsDetail Confirmed information Employer / operation Impala Platinum Refineries, part of Implats Location Springs, Gauteng Trade streams Fitting, including machining; Boilermaking…
CHECK · YOUR UNDERSTANDING

Check what the adverts confirm

Which date is confirmed in both listings?

Detail Confirmed information
Employer / operation Impala Platinum Refineries, part of Implats
Location Springs, Gauteng
Trade streams Fitting, including machining; Boilermaking
Fitting reference iplat_000174
Boilermaking reference iplat_000173
Closing date 30 November 2026; exact closing time not published
Qualification routes Completed relevant N2 or NCV Level 4 certificate
Preference Suitably qualified applicants from the local host community
Advertised outcome Relevant Fitter or Boilermaker Trade Test Certificate under MQA auspices
Start date, duration and stipend Not specified in either advert
Number of places Not specified; two listings do not establish two learner places

Both listings were marked Online when checked on 18 November 2026. Read the official Fitting advert and official Boilermaking advert for the live employer instructions.

02SECTION 2 · 1 MIN READAbout Implats and the Springs opportunityImplats produces platinum group metals and operates in South Africa, Zimbabwe and Canada. These particular opportunities are with Impala Platinum Refineries…

Implats produces platinum group metals and operates in South Africa, Zimbabwe and Canada. These particular opportunities are with Impala Platinum Refineries in Springs. The advertised setting is a mining and refinery environment, with practical engineering learning linked to plant operations.

The official Implats careers portal lists both roles, while the company’s recruitment and young-talent guidance explains its broader training pathways. Use the individual vacancy for the exact entry conditions: these two adverts expressly include an NCV Level 4 route alongside N2.

For an applicant, the useful question is how your existing theory can support workplace learning. Identify what you have studied, which practical exercises you can explain and what you still need to learn under supervision.

03SECTION 3 · 1 MIN READCompare Fitting and Boilermaking before you select ApplyPoint of comparison Fitting Boilermaking Reference iplat_000174 iplat_000173 Completed certificate N2 or NCV Level 4 in Mechanical Engineering N2 or NCV…
EXPLORE · STUDY FIELDS

Compare the two trade routes

Search the published field list or compare up to two. The subject-area groups are for browsing only; they are not employer eligibility criteria. Check the official study-field and institution rules.

2 listed fields

Fitting — iplat_000174Mechanical Engineering

Completed relevant N2 or NCV Level 4. N2: Mathematics, Engineering Science, Fitter Trade Theory and Engineering Drawing. Advertised outcome: Fitter Trade Test Certificate.

Explore related career information ↗
Boilermaking — iplat_000173Boilermaking

Completed relevant N2 or NCV Level 4. N2: Mathematics, Engineering Science, Structural Steel Drawing and Plater Trade Theory. Advertised outcome: Boilermaker Trade Test Certificate.

Explore related career information ↗
Point of comparison Fitting Boilermaking
Reference iplat_000174 iplat_000173
Completed certificate N2 or NCV Level 4 in Mechanical Engineering N2 or NCV Level 4 in Boilermaking
N2 subjects Mathematics; Engineering Science; Fitter Trade Theory; Engineering Drawing Mathematics; Engineering Science; Structural Steel Drawing; Plater Trade Theory
Advertised technical focus Mechanical fitting, machining, components and equipment maintenance Fabrication, structural steel, installation and plant maintenance
Trade-test outcome Fitter Trade Test Certificate Boilermaker Trade Test Certificate
Official vacancy Open the Fitting application route Open the Boilermaking application route

Mathematics and Engineering Science appear in both N2 lists. The trade-theory and drawing subjects distinguish the routes. Check the names on your results rather than assuming that any engineering N2 is sufficient.

If you believe you meet both sets of requirements, check the employer’s instructions for multiple applications. The vacancies have separate references and separate application destinations.

04SECTION 4 · 1 MIN READFitting requirements: check all four N2 subjectsFor Engineering Learner: Fitting — iplat_000174, the advert requires a completed N2 or NCV Level 4 Certificate in Mechanical Engineering. It…
CHECK · YOUR UNDERSTANDING

Match the Fitting subject pair

Alongside Mathematics and Engineering Science, which N2 subjects does Fitting require?

For Engineering Learner: Fitting — iplat_000174, the advert requires a completed N2 or NCV Level 4 Certificate in Mechanical Engineering. It also requires a basic understanding of fitting or mechanical trade principles and the stated medical fitness.

For the N2 route, the required subjects are:

  • Mathematics.
  • Engineering Science.
  • Fitter Trade Theory.
  • Engineering Drawing.

Place your results beside this list and compare each subject. If your certificate uses a different title or you are relying on an equivalent qualification, seek clarification before making an equivalence claim.

The advert names a completed certificate. It does not confirm that unfinished studies, Matric alone or an unrelated short course satisfy this condition. Read the Fitting minimum requirements on the official listing.

05SECTION 5 · 1 MIN READWhat the Fitting learner will learnThe Fitting advert describes structured workplace training with exposure to: Mechanical fitting and machining principles. First-line maintenance of mechanical equipment. Assembly,…

The Fitting advert describes structured workplace training with exposure to:

  • Mechanical fitting and machining principles.
  • First-line maintenance of mechanical equipment.
  • Assembly, disassembly and alignment of mechanical components.
  • Measuring tools and engineering drawings.
  • Maintaining plant equipment within normal operating parameters.

Edupstairs preparation guidance: think of a practical exercise where accuracy mattered. Can you explain what you measured, how you checked your work and how you responded to feedback? Use a real classroom, workshop or work example and label its setting honestly.

The advert includes machining within this Fitting programme. Its stated certificate outcome is a Fitter Trade Test Certificate; do not rename that outcome as a different trade qualification.

06SECTION 6 · 1 MIN READBoilermaking requirements: match the trade theory and drawing subjectsFor Engineering Learner: Boilermaking — iplat_000173, the advert requires a completed N2 or NCV Level 4 Certificate in Boilermaking. A basic…
CHECK · YOUR UNDERSTANDING

Match the Boilermaking subject pair

Which N2 trade and drawing subjects are listed for Boilermaking?

For Engineering Learner: Boilermaking — iplat_000173, the advert requires a completed N2 or NCV Level 4 Certificate in Boilermaking. A basic understanding of boilermaking trade principles and the stated medical fitness are also required.

For the N2 route, the required subjects are:

  • Mathematics.
  • Engineering Science.
  • Structural Steel Drawing.
  • Plater Trade Theory.

Do not substitute Fitter Trade Theory for Plater Trade Theory when describing your results. Equally, do not claim that a related drawing subject is automatically accepted as Structural Steel Drawing. Let the employer resolve genuine equivalence questions.

Compare your evidence with the Boilermaking requirements in the official advert before choosing the role.

07SECTION 7 · 1 MIN READWhat the Boilermaking learner will learnThe Boilermaking programme describes practical training in: Fabrication, maintenance and repair practices. Structural steel fabrication and installation. Maintenance and repair of…

The Boilermaking programme describes practical training in:

  • Fabrication, maintenance and repair practices.
  • Structural steel fabrication and installation.
  • Maintenance and repair of plant equipment.
  • Reading and interpreting engineering drawings.
  • Safe and efficient work in an industrial production environment.

Edupstairs preparation guidance: select a genuine drawing or fabrication assignment you can discuss. Explain the task, your own contribution, the checks you made and what you learned. Do not turn a training exercise into a claim that you are already a qualified artisan.

The advertised pathway leads towards a Boilermaker Trade Test Certificate. Selection is the beginning of the learning process; successful completion of its requirements matters.

08SECTION 8 · 1 MIN READThe NCV Level 4 route: read the wording carefullyBoth adverts allow an NCV Level 4 certificate in the specified field. The four-subject lists are expressly introduced as N2 subjects.…
CHECK · YOUR UNDERSTANDING

Keep the two qualification routes distinct

What do the adverts say about the four-subject lists?

Both adverts allow an NCV Level 4 certificate in the specified field. The four-subject lists are expressly introduced as N2 subjects. The adverts do not publish a separate NCV subject combination or a minimum percentage.

An NCV applicant should compare the qualification title and field with the selected advert. Where the certificate uses broader programme wording, ask whether the exact qualification is accepted. Do not quietly rewrite its title on your CV.

Use the TVET College Explorer and Careers & Qualifications Explorer for study research. These tools help you investigate pathways; they do not make Implats’ qualification-equivalence decisions.

Quick check: the article does not turn the N2 subject list into an invented extra NCV requirement. It preserves the two routes as the employer advertised them.

09SECTION 9 · 1 MIN READWho can apply? A guided readiness checkUse these questions to prepare. They do not provide an automatic eligibility decision. Check Your next action Completed qualification Identify your…

Use these questions to prepare. They do not provide an automatic eligibility decision.

Check Your next action
Completed qualification Identify your certificate and the role whose field it matches.
N2 subject combination If applying through N2, check all four subjects for that trade.
Basic trade understanding Prepare an honest explanation of relevant theory and practical learning.
Medical fitness Follow the employer’s assessment instructions for the specified work environments.
Local host-community preference Give accurate residence information; seek clarification if the community boundary is unclear.
Application readiness Prepare a readable CV, accessible contact details and qualification evidence for any requested checks.

The adverts do not state an age limit, a citizen-only rule, an unemployment condition or a previous-learnership exclusion. Do not copy such conditions from another employer’s programme. Additional questions may appear in the live application process.

10SECTION 10 · 1 MIN READLocal preference and medical fitness: what the adverts sayBoth listings give preference to suitably qualified applicants from the local host community. They do not publish a complete boundary or…
CHECK · YOUR UNDERSTANDING

Interpret local preference correctly

What does local host-community preference mean in the advertised wording?

Both listings give preference to suitably qualified applicants from the local host community. They do not publish a complete boundary or say that every applicant from elsewhere is automatically excluded. Residence also does not replace the qualification requirements.

Both require medical fitness for work at BMR and PMR plants and in an underground environment. Follow the employer’s assessment process. This guide cannot determine a person’s medical fitness or establish their eventual work assignment.

The listing metadata says “EE position: No”. That label should not be expanded into a claim that employment-equity considerations never apply. Keep the stated local preference and the employer’s selection process in view.

No medical certificate upload or proof-of-residence upload is specified in the public vacancy text. Supply evidence when the official process requests it.

11SECTION 11 · 1 MIN READTrade-test pathway: what the opportunity can lead toThe adverts describe training towards the relevant Fitter or Boilermaker Trade Test Certificate under the auspices of the Mining Qualifications Authority…

The adverts describe training towards the relevant Fitter or Boilermaker Trade Test Certificate under the auspices of the Mining Qualifications Authority (MQA). The MQA is the SETA for the mining and minerals sector.

The MQA artisan-development guidance explains a learner-registration process involving the employer, training provider and learner. That is broader programme context, not a second application route for these vacancies.

Keep three stages distinct: applying for a place, participating in the training, and satisfying the assessment requirements. Receiving an offer is not the same as already holding the trade-test certificate.

Use the Edupstairs SETA Platform to research sector training, and the QCTO Accredited Providers Explorer to investigate provider records for alternative study plans. A provider entry does not enrol you in this Implats programme.

12SECTION 12 · 1 MIN READStipend, duration and benefits: separate confirmed training from unknown termsItem What is supported Structured workplace training Advertised for both trades. Trade-test pathway Advertised; certification depends on completing the required learning…
EXPLORE · FUNDING

Check confirmed training and unconfirmed financial terms

Filter what the official notice confirms. Exact amounts or contract terms should be checked with the funder.

Structured practical trainingAdvertised as covered

Both adverts describe workplace learning in the relevant trade for selected learners.

Relevant trade-test certificationConditions apply

The advertised pathway leads to the relevant Fitter or Boilermaker Trade Test Certificate; required training and assessment must be completed.

Stipend, accommodation, meals and transportNot confirmed

No stipend amount or these additional benefits are confirmed in the two listings. Obtain the actual terms from Implats.

Item What is supported
Structured workplace training Advertised for both trades.
Trade-test pathway Advertised; certification depends on completing the required learning and assessment.
Monthly stipend or salary No amount is published in either advert.
Programme duration Not published.
Accommodation, meals or transport Not confirmed in the two listings.
Permanent job afterwards Not guaranteed by these adverts.

Before accepting an offer, ask for the training agreement, payment terms, location arrangements and expected schedule. Plan around the terms actually offered, especially if travel or accommodation would be necessary.

A stipend quoted for a different mining learnership cannot establish what this programme pays. Generic funding figures on training-authority pages are also not a confirmed payment to an individual Implats learner.

13SECTION 13 · 2 MIN READDocuments and profile setup: what is actually confirmedThe public new-applicant Sign Up interface requests a CV file of no more than 10 MB. It accepts PDF, DOC, DOCX…
TRY IT · YOUR DOCUMENTS

Prepare as you read

Track items locally on this device. The same progress appears on Page 2; this does not submit an application.

Documents prepared0 of 1
CHECK · YOUR UNDERSTANDING

Prepare a supported CV file

What is the confirmed CV-file rule in the public new-applicant signup?

The public new-applicant Sign Up interface requests a CV file of no more than 10 MB. It accepts PDF, DOC, DOCX or TXT. It also requests contact and profile information, including name, email, mobile number and citizenship / ID or passport details.

This is the visible profile-registration process. The public adverts do not provide a complete role-specific upload checklist, and protected application steps were not inspected.

Item Evidence or preparation guidance
CV Confirmed requirement for new-applicant signup. Maximum 10 MB; PDF, DOC, DOCX or TXT.
Qualification certificate Prepare it to support the completed-qualification claim; upload if the live process requests it.
Subject results / academic record Prepare readable evidence of the relevant N2 subjects or NCV qualification. A separate mandatory upload slot is not confirmed publicly.
Identity information The visible signup asks for identity details. It does not establish a confirmed ID-copy upload requirement for these roles.
Residence or medical evidence Provide only as requested through the official process; neither is a published upload requirement in the vacancy text.

No certification-age rule is stated. Do not import a three-month certification rule or a single combined-PDF instruction from an older advert.

The portal’s citizenship field is a profile question. It does not, by itself, create a citizen-only eligibility condition. The Edupstairs document tracker covers the confirmed CV preparation item and does not submit anything to Implats.

14SECTION 14 · 2 MIN READHow to apply for the correct Implats learnershipChoose the matching trade. Open Engineering Learner: Fitting — iplat_000174 or Engineering Learner: Boilermaking — iplat_000173. Recheck the live advert. Confirm…
Track application steps as you read

Tick steps for your own planning. This does not submit an application.

CHECK · YOUR UNDERSTANDING

Confirm vacancy submission

You created an applicant profile. What should you do next?

  1. Choose the matching trade. Open Engineering Learner: Fitting — iplat_000174 or Engineering Learner: Boilermaking — iplat_000173.
  2. Recheck the live advert. Confirm the reference, Springs location, qualification route and closing date before selecting Apply.
  3. Follow the applicant login or signup prompts. Use your existing profile where appropriate. A new profile requests a CV in an accepted format, no larger than 10 MB.
  4. Review any information parsed from your CV. Check names, contact details, certificate titles and subject names. Correct inaccurate profile information before relying on it.
  5. Complete the vacancy-specific questions. Describe your actual qualification and trade knowledge. Ask for clarification where a qualification title or equivalence is uncertain.
  6. Provide requested supporting evidence. Follow the live form’s upload requirements; the public advert does not establish every required attachment.
  7. Review and submit the specific application. Check the reference and contact information, read the declarations and complete the final submission steps.
  8. Retain the actual acknowledgement. Keep any confirmation or application reference. A registered profile, uploaded CV or saved draft is not automatically a submitted vacancy application.

For registration or application problems, use the official Implats candidate support page. That page states that applications are not processed through its support forums. A support enquiry does not replace the vacancy application.

Both roles close on 30 November 2026, with no exact closing hour published. Set an earlier personal target so you have time to resolve an upload or account problem.

15SECTION 15 · 1 MIN READBuild an ATS-friendly CV around your actual trade evidenceUse the Edupstairs ATS CV Assistant to organise a clear CV. Keep the facts consistent with your certificate and results. The…

Use the Edupstairs ATS CV Assistant to organise a clear CV. Keep the facts consistent with your certificate and results. The Implats recruitment guidance recommends a focused, tailored CV and real examples of experience.

Put the selected trade and reference in your application notes. In the CV, make your completed qualification, institution and relevant subjects easy to find. If you have workshop, employment or volunteering experience, describe what you actually did and whether it was supervised training.

Applying for Useful evidence to highlight honestly
Fitting Relevant subjects, mechanical workshop exercises, measuring tasks, drawing interpretation and examples of accurate work.
Boilermaking Relevant subjects, structural drawing exercises, fabrication learning and examples of checking work against instructions.

A practical college assignment can be useful evidence when labelled correctly. Do not describe yourself as trade-tested unless you hold that qualification, and do not invent employment to make a short CV look longer.

The portal says it parses the CV to help create your profile. Check the resulting information carefully. A polished file does not help if the profile ends up showing the wrong qualification or an incomplete telephone number.

16SECTION 16 · 1 MIN READPrepare for questions with examples you can explainThese are Edupstairs practice prompts, not a claim about the exact Implats selection test: Practice question What a useful answer contains…

These are Edupstairs practice prompts, not a claim about the exact Implats selection test:

Practice question What a useful answer contains
Why did you choose this trade? A link between your studies, a real learning experience and what you want to develop.
Tell us about a time accuracy mattered. The task, your checks, the result and what you learned.
What do you do when an instruction or drawing is unclear? How you seek clarification and check understanding before proceeding.
Describe a problem you solved with other people. Your actual contribution, communication and response to feedback.

Review your own theory and assignments. Aim to explain principles in your own words and acknowledge what you still need to learn. Follow the employer’s assessment instructions if you are invited to the next stage.

Career choice also matters. Use Career Discovery to reflect on your interests, the Fitter and Turner career guide for broader mechanical-trade research and the Boiler Maker career guide for fabrication-related research. The Fitter and Turner profile does not change this advert’s stated Fitter certificate outcome.

17SECTION 17 · 1 MIN READWhat was not specified in these two advertsA confirmed 2027 intake or commencement date. Programme duration or the number of learner places. A stipend amount or a detailed…
  • A confirmed 2027 intake or commencement date.
  • Programme duration or the number of learner places.
  • A stipend amount or a detailed benefits package.
  • An exact closing hour.
  • An age limit, citizen-only condition or unemployment requirement.
  • A previous-learnership exclusion.
  • A separate NCV subject list or minimum academic percentage.
  • A complete role-specific document checklist or certification-age rule.
  • Accommodation, transport, meals or guaranteed permanent employment.

These gaps are not an invitation to borrow details from an older Implats advert or another company. Confirm material questions through the official process. The two current references are iplat_000174 and iplat_000173.

The public listing status was Online on 18 November 2026. Recheck it before applying, and monitor your actual application correspondence. No vacancy-specific feedback deadline is published in the adverts.

18SECTION 18 · 2 MIN READStudy, Trade and Application ResourcesEdupstairs resource How to use it TVET College Explorer Research technical study options and college pathways if you need to complete…
Edupstairs resource How to use it
TVET College Explorer Research technical study options and college pathways if you need to complete or strengthen the relevant qualification.
University Explorer Explore longer-term study options and admission requirements. A university degree is not listed as a separate requirement for these learnerships.
Careers & Qualifications Explorer Compare occupational pathways while keeping the exact Implats entry requirements separate.
Career Discovery Reflect on the work that interests you before choosing your trade direction.
National Skills Intelligence Explorer Research skills evidence and check its source and date; it is not a guarantee of vacancies or employment.
SETA Platform Understand sector training and explore other occupational learning opportunities.
MQA Learnerships Guide Read about mining-sector learning routes. Apply to these vacancies through Implats, not through a general guide.
QCTO Accredited Providers Explorer Research provider and assessment-centre records. Check current programme and site scope; a directory entry is not an Implats partnership.
Create an ATS-friendly CV Prepare a readable CV that accurately lists your qualification, subjects and practical learning.
Latest learnership guides Continue your search and check the deadline and requirements of every programme.
Recruitment Scam Detector Investigate questionable recruitment claims and verify them with the official employer.

You can use several tools together: research the trade, check the education route and prepare the CV. None of these tools confirms your selection, registers you for the Implats programme or changes its minimum requirements.

19SECTION 19 · 2 MIN READLatest and related learnership articles on EdupstairsThe SAFCOL GETC and Mechanized Harvesting guides are among the latest learnership articles identified during the 18 November 2026 research. The…

A future advertised deadline does not guarantee that a portal is still accepting applications. iMasFinance is marked closed, and Discovery’s availability is unconfirmed. Keep those distinctions when choosing where to spend your application time.

20SECTION 20 · 1 MIN READRelated artisan apprenticeships: compare them separatelyThe following are apprenticeship guides, listed separately because they may interest readers researching an artisan pathway: Linked apprenticeship guide Advertised deadline…

The following are apprenticeship guides, listed separately because they may interest readers researching an artisan pathway:

Linked apprenticeship guide Advertised deadline / status Relevance
SAFCOL Artisan Development Programme – Apprenticeships 2027 Advertised closing: 20 November 2026 A separate artisan apprenticeship including Fitter & Turner and Boilermaking. Check its own qualifications and conditions.
FLSmidth Apprenticeship Programme 2026 for Matric Applicants Advertised closing: 18 November 2026; check current employer status An apprenticeship closing on the review date. Submission availability and closing hour are unverified; treat it as closed after that date unless extended.

Do not transfer an apprenticeship’s duration, stipend, age restriction or document rules into the Implats learnership. Even similar trade names can sit within different recruitment arrangements.

21SECTION 21 · 3 MIN READFrequently asked questionsWhen do applications close? Both Implats listings close on 30 November 2026. Neither gives an exact closing hour. Is the 2027…
When do applications close?

Both Implats listings close on 30 November 2026. Neither gives an exact closing hour.

Is the 2027 start date confirmed?

No. The adverts do not name a 2027 intake or state a commencement date. This article is a planning guide.

Where are the opportunities based?

The listings specify Springs, Gauteng, at Impala Platinum Refineries.

Do two listings mean only two learner places?

No. Two trade streams are advertised, but the number of places in either stream is not published.

Can I apply with an N2 certificate?

Yes, if it is the completed qualification in the specified field and includes the four N2 subjects required for the chosen trade. Other stated conditions also apply.

Can I apply through NCV Level 4?

Both adverts include a relevant completed NCV Level 4 certificate. Confirm the exact field match if your certificate uses broader programme wording.

Do the four N2 subjects automatically become an extra NCV subject requirement?

The adverts identify those lists specifically as N2 subjects. They do not publish a separate NCV subject combination.

Is Matric alone enough?

The current adverts require a relevant completed N2 or NCV Level 4 certificate. They do not list Matric alone as an alternative.

Is there a published age limit?

No age limit is stated in the two vacancy texts. Follow any additional questions in the live application without importing rules from another programme.

Must I be unemployed or have no previous learnership?

Neither of those conditions is stated in these two adverts.

Do local applicants get preference?

Yes, suitably qualified local host-community applicants receive preference. A boundary and an automatic exclusion of other applicants are not published.

What does the medical requirement cover?

The adverts require fitness for the BMR and PMR plants and underground work. Follow the employer’s assessment process.

What stipend will I receive?

No stipend amount is published in either listing. Confirm the payment terms if offered a place.

How long is the programme?

The two current adverts do not specify the duration. Do not substitute a length from an older Implats advertisement.

What CV formats are accepted for signup?

The public new-applicant interface accepts PDF, DOC, DOCX or TXT, with a maximum CV size of 10 MB.

Is a profile the same as a submitted application?

No. Complete the application for the selected vacancy and retain the actual acknowledgement.

Can I apply through the support form?

The official support page says applications are not processed through its support forums. Use the vacancy’s Apply route.

Will selection make me a qualified artisan immediately?

No. The advertised trade-test outcome depends on completing the required learning and assessment. Permanent employment is not promised.

Where do I apply?
22SECTION 22 · 1 MIN READEditorial integrity, sources and your next actionReviewed on 18 November 2026. Requirements, duties, reference numbers, location and deadline were checked against the official Fitting listing and official…

Reviewed on 18 November 2026. Requirements, duties, reference numbers, location and deadline were checked against the official Fitting listing and official Boilermaking listing. Profile-file information comes from the public signup interface; full protected application steps were not inspected.

The Implats recruitment guidance, candidate support page and MQA artisan-development information provide additional context. Role-specific adverts determine the entry requirements. Edupstairs CV examples and practice questions are application guidance, not additional employer conditions.

This article keeps the 2027 planning label separate from an unconfirmed start date. It does not invent payment, duration or headcount. Related guides show their own deadlines and uncertainty, and the apprenticeships are identified separately.

Your next action: open your certificate and results, compare them with the correct trade, prepare your CV and complete the official application before the deadline. A careful subject check now can prevent an avoidable application mistake later.

Edupstairs provides independent opportunity information and preparation tools. Implats determines selection, assessments and programme terms.

Want to continue?

Use the programme selector, eligibility checker and application centre whenever you are ready.

Explore programmes ↓
Your next step

Finished exploring the opportunity?

Review the programme requirements and prepare for the official application on Page 2. The quick sections are optional.

View application details →
Share an opportunity

Know someone this could help?

Send the verified article, not screenshots of application details. Always check the closing date.

Explore the programme

Select the programme or position that fits you

Review the details and follow the correct application path.

01

Engineering Learner: Fitting

Completed N2 or NCV Level 4 Certificate in Mechanical Engineering

View application details ↗
02

Engineering Learner: Boilermaking

Completed N2 or NCV Level 4 Certificate in Boilermaking

View application details ↗
Engineering Learner: Fitting

Fitting including machining. N2 subjects: Mathematics, Engineering Science, Fitter Trade Theory and Engineering Drawing. Basic fitting/mechanical understanding and medical fitness for BMR, PMR and underground environments required. Suitably qualified local host-community applicants receive preference. Advertised pathway: Fitter Trade Test Certificate under MQA auspices. Closes 30 November 2026; no exact closing hour, start date, duration, stipend or headcount stated. Open this specific vacancy, select Apply and follow the portal instructions. New-applicant signup requires a CV up to 10 MB in PDF, DOC, DOCX or TXT. Other attachments depend on the live application.

Continue to application centre →
Knowledge check

Test your understanding of this opportunity

This short exercise helps you check the important details before proceeding.

What is the best first step before applying for one of these Implats learnerships?

Internal resources

All Edupstairs tools and explorers

Find any tool without leaving the article first. Each link opens the selected Edupstairs resource.

Your next step

Continue to the application centre

Review the required documents and the correct official employer application channel.

View application details →

Edupstairs is an independent information publisher, not the recruiting employer. Verify all requirements with the official organisation. An eligibility self-check does not guarantee selection. Advertisements can close or change without notice.

Ask the Community